XHO X-Series Dual LED Add-On Kit
Reef Brite 24-inch X-Series Dual LED Add-On Kit (X24DUAL) shown with: two Kessil A360X (not included)
Manufactured in the USA, the Reef Brite® X-Series Dual LED Add-On Kit is an excellent alternative to T5HO lighting, and is compatible with EcoTech Radion, AI Hydra, Kessil A360X, A500X, AP9X*, and AP700* fixtures with no drilling or special tools required. Utilizing 2 Actinic Blue XHO LED fixtures, the X-Series Dual brings out incredible color and fluorescence in your corals, anemones, and other invertebrates while promoting growth.
An included in-line dimmer allows you to set the intensity of the XHO LEDs to your desired level. Can be controlled via APEX controllers using our APEX LED interface, or our Bluetooth LE controller (sold separately).
Using the included hardware, the X-Series Dual integrates seamlessly with your lighting to maintain a sleek look, and comes complete with a universal hanging kit.
Available in 24”, 36”, 48” and 60″ models.
NOTE: The X-Series Dual LED systems will add approximately 3-8 lbs to your lighting setup depending on the XHO size (24" - 60").
Ensure your tank or mounting configuration can safely support this additional weight.
An included in-line dimmer allows you to set the intensity of the XHO LEDs to your desired level. Can be controlled via APEX controllers using our APEX LED interface, or our Bluetooth LE controller (sold separately).
Using the included hardware, the X-Series Dual integrates seamlessly with your lighting to maintain a sleek look, and comes complete with a universal hanging kit.
Available in 24”, 36”, 48” and 60″ models.
NOTE: The X-Series Dual LED systems will add approximately 3-8 lbs to your lighting setup depending on the XHO size (24" - 60").
Ensure your tank or mounting configuration can safely support this additional weight.
*AP9X users: If using the X-Series with Kessil's arms, 2 arms are recommended per AP9X to evenly support and distribute the additional weight. Also required are 4 standoffs per AP9X used, which are not included with the Kessil arm or X-Series hardware.
- Standoff specification: Aluminum Male-Female Threaded Hex Standoff, 8mm Hex, 16mm Long, M4 x 0.70mm Thread
- Order here: https://www.mcmaster.com/98952A149
What's included:
X24DUAL |
X36DUAL |
X48DUAL |
X60DUAL |
|
Reef Brite Actinic Blue* XHO LED: |
2 - 24" XHOs |
2 - 36" XHOs |
2 - 48" XHOs |
2 - 60" XHOs |
2-Way Connector: |
1 |
1 |
1 |
N/A |
In-Line Dimmer: |
1 |
1 |
1 |
2 |
Power Supply: |
1 - PS90 |
1 - PS120 |
1 - PS120 |
1 - PS250 |
X-Series Light Bracket: |
2 |
4 |
4 |
6 |
X-Series End Bracket: |
2 |
2 |
2 |
2 |
Hardware Kit: |
1 |
2 |
2 |
3 |
LED Cable Hanging Kit: |
1 |
1 |
1 |
1 |
*Other XHO LED colors available upon request
One-Year Limited Warranty.
One-Year Limited Warranty.
Compatible Fixtures and Quantities
*Not included in X-Series Kits
X24DUAL |
X36DUAL |
X48DUAL |
X60DUAL |
2 – Kessil A360 |
4 – Kessil A360 |
4 – Kessil A360 |
6 – Kessil A360 |
1 - AP9X or AP700 |
2 - AP9X or AP700 |
2 - AP9X or AP700 |
3 - AP9X or AP700 |
1 – Ecotech XR30 or XR15 |
2 – Ecotech XR30 or XR15 |
2 – Ecotech XR30 or XR15 |
3 – Ecotech XR30 or XR15 |
1 – AI Hydra 26, 32, 52, or 64 |
2 – AI Hydra 26, 32, 52, or 64 |
2 – AI Hydra 26, 32, 52, or 64 |
3 – AI Hydra 26, 32, 52, or 64 |
Installation Guide: |
| ||
*If you are unsure about the mounting or attachment of the X-Series system, we recommend contacting a licensed professional to avoid serious personal injury or property damage. Reef Brite will not be responsible for any damages resulting from improperly mounted or installed X-Series kits.
IMPORTANT NOTICE:
When installing any lighting product, power supply, or controller, do not install in
a manner that will allow any part or component to come in direct contact with water.
Reef Brite assumes no liability for incorrectly installed products.